The seismic detector reacts to the characteristic vibration patterns of all breaking-and-entering tools, such as hammers, drills, diamond saws, hydraulic pressure tools and thermal tools like welding torch and thermal lance. It sense vibrations that occur with a 3 to 14 meter radius of where they are mounted, depending on the material and design of the protected object.

The Seismic Configuration Manager 700 (SCM700) is a window based software program for the programmable seismic detector VV700. The program is very easy to install on your lap-top and will give you access to plenty of new and useful features such as background signal levels, verification of the detector settings, analysing software for on-site performance measurements etc. The VV700 is delivered un-programmed, but by using the configuration program the installer can choose from five pre-determined detector modes. Each program is tailored to a specific application. This will help you to make the most of the installation both to avoid false alarms and to have the highest performance when it comes to signal detection.
You communicate with the VV700 detector from your laptop with the configuration cable VVI740. The configuration cable VVI740 is only a tool that the installer need during the actual configuration of the detector and can be used to all his VV700 detector installations.

The VV700 features a plug in connection for all transponders designed in accordance with the draft standard IEC 839-2. In this way the transponder is integrated in the housing of the detector and is easily installed without any cabling or separate housing for the transponder. If you don't have your own transponder the VV700 must have another plug-in board connected to the detector e.g. the Form A relay board VVI760 or the Form C relay board VVI770.
A complete range of accessories is provided for all kinds of applications to achieve the highest security.